Caliper 목록

1. The part to push the pad in the caliper does not return.

   
   There are several reasons for this, one of which is that the presence of foreign substance on the bearing and spring side in the caliper gear box and disrupts the return. If this phenomenon occurs, try to push the lever manually when operating the caliper.
   Then, the phenomenon that the lever does not come back and stop appears. Then, the caliper must be quickly repaired.

   

    

   
    

   닫기

2. The part to push the pad in the caliper does not return.

   There are several reasons for this, one of which is that the part to push the pad does not move backward.
   This is because there is rubber in the part that pushes the pad, however, as the rubber tears, foreign substance goes into that side and disrupts the backward movement of the tappet.
   If so, the caliper must be quickly repaired.

   
   

   닫기

3. One-side wear of the caliper brake pad occurs.

   There are several reasons for this, and as one of them, and when the part to push the pad does not push side by side, one-side wear may occur horizontally. Then, since early replacement may be done because the one-side of the pad wears, and if things get wrong, there is a risk of an accident, quick repair of the caliper is necessary.
   There are several reasons for this, one of which is that one-side wear may occur if the movement of the carrier part is not good. This is because the pad starts operating as the caliper pushes the pad, and the opposite side of the pushing side is braked while being pushed. However, if the operation of the carrier part does not smoothly operate, such operating part does not work well, so the pad wears on the pushing side only and one-side wear may occur. Then the caliper must be repaired.

   
    

   

    

    

   닫기

4. One-side wear of the caliper brake pad occurs.

   There are several reasons for this, one of which is that one-side wear may occur if the movement of the carrier part is not good. This is because the pad starts operating as the caliper pushes the pad, and the opposite side of the pushing side is braked while being pushed. However, if the operation of the carrier part does not smoothly operate, such operating part does not work well, so the pad wears on the pushing side only and one-side wear may occur. Then the caliper must be repaired.

   

    

   
   
   

   닫기

5. The caliper sensor is not detected.

   It is because foreign substance enters into the caliper’s sensor or damage occurs to the board side, so detection is failed. In this case, since the degree of the ware of the pad is not checked, it can lead to an accident by any possibility, so quick repair of the caliper is needed.

   

    

    

   닫기

6. The caliper carrier is locked.

   It is locked because foreign substance enters into the pins of both sides of the carrier.
   It can be checked even by appearances. If the carrier is moved by hand, a lot of power is required and it may not move at all. In this case, the caliper does not properly operate, and when pushing the pad, only the pushing pad can be worn out. Quick repair of the caliper is needed.

   

    

    

   닫기

7. Precautions when operating a aduster

   When replacing the pad in the caliper, move the piston backward.
   In this process, moving backward is done by turn the adjuster (so-called 깔깔이- KKalKKali) in the reverse direction.
   In this process, if too much force is taken, the hexagonal part may be worn out, so proper operation may not be possible.
   Then the caliper needs to be repaired, so careful operation is necessary.

   

    

   
   
   

   닫기

8. When the caliper is checked, it returns when the lever is operated, but the adjuster does not work.

   When checking the operation on the caliper, as pressing the lever, forward movement starts.
   And then, in the process of moving forward, return is done as the adjuster turns a little bit, and in this process, if the adjuster does not turn in the forward direction, the phenomenon of coming and going occurs.
   If so, the brake may not be applied since the pad does not push properly even though the pad is reached.
   Quick caliper repair is required due to the poor operation of the adjuster.

   

    

   
   
   

   닫기